Specifications
|
| Model |
TR-10C and TR-10CX
This Model |
HW-10ASY
for Comparison |
| Manual |
|
HW-10ASY Manual |
| Certificate |
ALI Certified |
CE Certified |
| Lock Release |
Single Point Release |
Single Point Release |
| Warranty |
3 Years (36 months) |
3 Years (36 months) |
| Lifting Capacity |
10,000 LB |
10,000 LB |
| Overall Height |
- 143 3/4" (TR-10C)
- 166" (TR-10CX)
|
141 3/16" |
| Overall Width |
- 140 7/16" (narrow spacing)
- 146 3/8" (medium spacing)
- 152 1/4" (wide spacing)
|
139 1/8" (standard)
140 15/32" (post rotated) |
| Maximum Lift height with Truck Adapters |
78" |
81" |
| Maximum Lift height without Truck Adapters |
69" |
75" |
| Minimum Height of Adjustable Pads from Ground |
4" |
4" |
| Drive Through Width (Carriage to Carriage) |
- 88 1/8" (narrow spacing)
- 94 1/16" (medium spacing)
- 100" (wide spacing)
|
104" (symmetric)
97" (asymmetric) |
| Column to Column Width |
- 97 1/8" (narrow spacing)
- 103 1/16" (medium spacing)
- 109" (wide spacing)
|
113" (symmetric)
107" (asymmetric) |
| Driving Mode |
Direct Drive |
Dual hydraulic cylinders, chain drive |
| Motor |
220V Single Phase 3HP 10A (recommend a 30A breaker) |
220V Single Phase 3HP 10A (recommend a 30A breaker) |
| Time to full rise |
50 seconds |
50 seconds |
| Hydraulic Oil |
3-5 gallons AW32/AW46 (not included) |
3-5 gallons AW32/AW46 (Not Included) |
| Truck Adapters |
3 sets: 1 1/2", 3", and 6" tall |
1 set: 4" tall |
| Front Arms |
3 Stage reach from 19 5/16" to 41 7/8" |
Straight Front 3 Stage reach from 22 7/8" to 42 5/8" |
| Back Arms |
3 Stage reach from 37 5/16" to 60 3/16" |
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8" |
| Column Steel Thickness |
1/4" |
13/64" |
| Carriage Steel Thickness |
1/4" |
15/64" |
| Carriage Yoke Thickness |
9/16" |
9/16" |
| Arm Steel Thickness |
1/4" |
15/64" |
| Base Plate Steel Thickness |
13/16" |
5/8" |
| Shipping Weight |
2000 LB and 200 LB (2 ft height extension for TR-10CX) |
1470 LB and 120 LB |
| Shipping package size |
142"L x 22"W x 38"H and 30"L x 17"W x 17"H (2ft height extension for TR-10CX) |
- 113"L x 22"W x 40"H (Car Lift)
- 38"L x 17"W x 14"H (2ft Height Extension Crate)
|
| Concrete Requirement |
6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below) |
| Model |
TR-10C and TR-10CX
This Model |
HW-10ASY
for comparison |
